P16S, pa16s www.vishay.com vishay sfernice revision: 24-sep-15 1 document number: 51063 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 knob potentiometer with switch the P16S is a revolutionary concept in panel mounted potentiometers. this unique de sign consists of a knob driving and incorporating a ce rmet potentiometer. only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance. features ? P16S - version for milita ry, professional and industrial applications (cermet): 1 w at 40 c ? pa16s - version for professional audio applications (conductive plastic): 0.5 w at 40 c ? compact (integrated) ? detent and electric cut off at beginning of travel ? fully sealed and panel sealed ? metallic or plastic knob options ? custom knob on request ? test according to cecc 41000 or iec 60393-1 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 ? ? ? ? ? dimensions in millimeters ( 0.5 mm) P16Snp P16Snm panel cutout panel sealing ring thickness nut 2 mm washer 1.5 mm thread m10 x 0.75 12 wrench 9.6 8.8 13.5 1 15.5 1 7.2 panel sealing ring thickness nut 2 mm washer 1.5 mm thread m10 x 0.75 12 wrench 10.2 9.4 7.2 13.5 1 15.5 1 ? 10 + 0.1 + 0 8.1 + 0.1 + 0 panel thickness max.: 3 mm 3 terminals 0.3 8 c 30 a 1.8 b reference mark ? 16
P16S, pa16s www.vishay.com vishay sfernice revision: 24-sep-15 2 document number: 51063 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications P16S pa16s resistive element cermet conductive plastic electrical travel 220 10 220 10 power rating chart circuit diagram taper resistance range linear law 22 ? to 10 m ? 1 k ? to 1 m ? logarithmi c laws 100 ? to 2.2 m ? 470 ? to 500 k ? standard series e3 1 - 2.2 - 4.7 and on request 1 - 2 - 5 1 - 2.2 - 4.7 tolerance standard 20 % 20 % on request 10 % 10 % (1 k ? to 100 k ? ) power rating linear 1 w at +40 c 0.5 w at +40 c logarithmic 0.5 w at +40 c 0.25 w at +40 c temperature coefficient (typical) 150 ppm 500 ppm dielectric strength (rms) 2500 v 2500 v limiting element voltag e (linear law) 350 v 350 v contact resistance variation 3 % rn or 3 ? 2 % rn or 3 ? end resistance (typical) 1 ? 1 ? insulation resistance (500 v dc )10 6 m ? 10 6 m ? 0 40 140 0.50 0 ambient temperature in c reted power in w 60 20 100 80 P16S lin. taper ?a? P16S log. taper ?l & f? 1.00 nm nm 0.75 1.25 0.25 120 np nm np np & pa16s lin. taper pa16s log. taper a c b cw (2) (3) (1) 100 80 60 40 20 0 0 100 80 60 40 20 % clockwise knob rotation % total resistance f l a 10 switch on-off
P16S, pa16s www.vishay.com vishay sfernice revision: 24-sep-15 3 document number: 51063 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? nothing stated herein shall be construed as a guarantee of quality or durability. mechanical specifications mechanical travel 300 5 operating torque 2 ncm typical end stop torque 25 ncm maximum tightening torque of mounting nut 250 ncm maximum unit weight 4.5 g typical environmental specifications metallic knob plastic knob temperature range -40 c to +125 c -40 c to +85 c climatic category 40/100/56 40/85/56 sealing sealed container and panel sealed protection grades ip67 switch electrical and mechanical specifications on / off switch actuation in counter clockwise position (between terminal a and terminal b) switching current P16S 100 ma max. pa16s 1 ma max. switch actuation torque 4 ncm min. switch actuation travel 30 5 dielectric strength ? terminal to terminal (rms) 1000 v insulation resistance between contacts 10 6 m ? switch mechanical endurance 10 000 cycles 1 cycle on-off-on marking ? ohmic value code, tolerance, code and taper ? manufacturing date code packaging ? carton box of 20 pieces control knob black metallic knob (nm). black plastic knob (np). for white and blue color see ordering information. other dimensions, shapes, co lors of control knobs are manufactured on request - please consult vishay. other reference marks (shapes, colors) and legends can be printed on plastic knob on re quest - please consult vishay. standard resistance element data standard resistance values P16S cermet pa16s conductive plastic linear taper logarithmic taper linear taper logarithmic taper max. power at 40 c max. voltage max. cur. through wiper max. power at 40 c max. voltage max. cur. through wiper max. power at 40 c max. voltage max. cur. through wiper max. power at 40 c max. voltage max. cur. through wiper ? wv mawv mawv mawv ma 22 1 4.69 213 47 1 6.85 146 100 1 10 100 0.5 7.1 71 220 1 14.8 67.4 0.5 10.5 48 470 1 21.7 46.1 0.5 15.3 32.6 0.25 10.8 23.1 1k 1 31.6 31.6 0.5 22.4 22.4 0.5 22.4 22.4 0.25 15.8 16 2.2k 1 46.9 21.3 0.5 33.2 15.1 0.5 33.2 15.1 0.25 23.5 11 4.7k 1 68.5 14.6 0.5 48.5 10.3 0.5 48.5 10.3 0.25 34.3 7 10k 1 100 10 0.5 70.7 7.07 0.5 70.7 7.07 0.25 50 5 22k 1 148 6.74 0.5 105 4.77 0.5 105 4.77 0.25 74 3.4 47k 1 217 4.61 0.5 153 3.26 0.5 153 3.26 0.25 108 2.3 100k 1 316 3.16 0.5 224 2.24 0.5 224 2.24 0.25 158 1.6 220k 0.56 350 1.59 0.5 332 1.51 0.5 332 1.51 0.25 235 1.1 470k 0.26 350 0.75 0.26 350 0.74 0.26 350 0.74 0.25 343 0.7 1m 0.12 350 0.35 0.12 350 0.35 0.12 350 0.35 2.2m 0.05 350 0.16 0.056 350 0.16 4.7m 0.02 350 0.07 10m 0.01 350 0.012
P16S, pa16s www.vishay.com vishay sfernice revision: 24-sep-15 4 document number: 51063 for technical questions, contact: sferpottrimmers @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance tests conditions typical values and drifts ? r t / r t (%) ? r 1-2 / r 1-2 (%) other electrical endurance 1000 h at rated power 90'/30' cycle at +40 c 5 % - insulation resistance: > 10 4 m ? contact res. vari ation: < 2 % rn damp heat, steady state 56 days 40 c, 93 % hr 2 % 1 % insulation resistance: > 10 4 m ? mechanical endurance 50?000 cycles 5 % - contact res. va riation: < 2 % rn shock 50 g s at 11 ms 3 successive shocks in 3 dimensions 0.2 % 0.5 % - vibration 10 hz to 55 hz 0.75 mm or 10 g s during 6 h 0.2 % - ? v 1-2 / ? v 1-3 ? 0.5 % ordering information P16Snp223mab15 model style ohmic value tolerance taper packaging code special number P16S = cermet pa16s = conductive plastic nm : metallic black np : plastic black wm : metallic white wp : plastic white bp : plastic blue 223 = 22 k ? for ohmic value range see electrical specification m = 20 % on request: k = 10 % a : linear l : clockwise logarithmic f : inverse clockwise logarithmic b15 = box of 20 pieces (if applicable) given by vishay for custom design part number description (for information only) P16S np 22 k ? 20 % a bo20 e3 model style ohmic value tolerance taper special packaging special lead (pb)-free related documents application notes potentiometers and trimmers www.vishay.com/doc?51001 guidelines for vishay sfernice resistive and inductive components www.vishay.com/doc?52029
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
